HomeTech SupportELTEC Corp: Pioneering Pedestrian Safety with Solar SolutionsSchool Zones Beacons: The Sign You Need to Slow Down Even When School's Out
Find A Dealer
Dealers USADealers CanadaDealers Caribbean
Contact
GSA contract holder EDWOSB Certified WBE Recertification through 6/17/2022 WOSB Recertification 6/17/2022 HUB New through 06/17/2022 TexasHUB Certified
PRODUCTS
Call Us 800-227-1734
GET A QUOTE
Traffic Signal Controllers
Mikros EIC – ELTEC’s Intelligent Traffic ControllerTimeSync-GPSFS-4 DC FLASHERFS-5 DC FLASHERDiscontinued: FS-3 DC Flasher
Time Clocks
TC-18 Scalable Based ControllerSYSTEM 3000 Network/IP Programmable Time Clock(DISCONTINUED) NTC-17E seriesDLPRO 18(DISCONTINUED) DLPRO 17EDLPRO 3000RMS 5000 School Clock
Pedestrian Crossing Systems
Rectangular Rapid Flashing Beacon (RRFB)PHB (Pedestrian Hybrid Beacon)
Warning Systems
Emergency Vehicle Hybrid BeaconEmergency Vehicle Caution Systems (EVCS)LED Enhanced SignsSchool Zone Warning Signs & Systems24-Hour Warning/Caution SystemsFlood Warning SystemsTraffic Detection: Solar Powered SystemsLighting: Solar Powered SystemsPedestrian Warning SignsPedestrian Crossing Light SystemsCameras: Solar Powered SystemsRadar Speed Display
Io Traffic Products
RMS 5000
Home Products Pedestrian Crossing Systems PHB (Pedestrian Hybrid Beacon)

PHB (Pedestrian Hybrid Beacon)

Often a traffic signal is not justified under MUTCD standards, but pedestrians can face traffic conditions that are risky to extremely hazardous. The pedestrian activated PHB (Pedestrian Hybrid Beacon) high intensity activated crosswalk offers increased safety at an affordable price. Because the controls are located in a pole mounted cabinet, the cost compared to a standard intersection controller on a pad mounted cabinet tends to cost substantially less.

download Data sheet GET A QUOTE
Description
Specs
Additional Information

Description

(a.k.a.) “PHB (Pedestrian Hybrid Beacon)” = High Intensity Activated Crosswalk

A pedestrian hybrid high intensity activated traffic crosswalk signal is a special type of beacon used to warn and control motorists at marked, un-signalized crosswalks to assist pedestrians crossing a street or highway. As required by the MUTCD, pedestrian hybrid beacons should only be installed in conjunction with marked crosswalks and pedestrian countdown signals.

ELTEC offers a SOLAR POWERED PHB (Pedestrian Hybrid Beacon) high intensity activated crosswalk system, using our innovative Mikros EIC (ELTEC Intelligent Controller) with a built-in conflict monitor. Now, an off-the-grid, complete, ready to install, solar powered wireless pedestrian hybrid traffic controller is available! AC systems are also available.

​To learn more about our Solar Powered PHB (Pedestrian Hybrid Beacon) pedestrian crosswalk, see the YouTube video below:
The video is also available at: youtube.com

 

 

As required by the MUTCD standards (Chapter 4F 2009 Edition), a typical pole/mast arm includes:

  • Two 3-signal beacon assemblies for each approach (minimum requirement)
  • One pedestrian signal head (WALK/DON’T WALK) at each end of crosswalk (countdown timer optional)
  • Pedestrian Activated (push button or passive activation)

A small cabinet housing the Mikros EIC completes the system. If the PHB (Pedestrian Hybrid Beacon) system is solar powered, a charge controller and battery are added inside the cabinet; solar panels with a rack are mounted on the pole/mast arm.

Flash Sequence for Pedestrain Beacon

Specs

Request product specs

Additional Information

FEATURES and BENEFITS

Solar Powered

  • Efficient MPPT Charge Controller
  • Sized by Computer Program
    • Ensures Sufficient Power During all Months of the Year
    • Sized for Usage Based upon Estimated Daily Activations
       
  • Self Contained/ No Electric Bills
  • Eliminates Power Interruptions
  • Electrical Contractors Not required for Installation
  • High Efficiency Self Cleaning Solar Panels
    • 20 Year Warranty
    • Site Specific Mounting Rack Options
       
  • No Maintenance AGM (Absorbed Glass Mat) Battery
    • Performs Better in Cold Climates
    • 5 Year Pro-Rated Warranty

High Efficiency, Low-Power System Components

  • Mikros EIC Electrical Consumption: 2 Watts
  • Beacons consume no more than 4 Watts Each
  • Pedestrian Head (DON’T WALK/WALK) Continuous 24/7: Less than 4 Watts
  • Pedestrian Head + Countdown Timer operating 24/7: Less than 5 Watts
  • Automatic Dusk-to-Dawn Night Dimming

Flexible System

  • Tailored for Project Requirements
  • Wireless Communication & Control Between Signals: Can be Hardwired
    • No Trenching or Boring Cable
       
  • Pedestrian Push Button: Brand Flexibility
  • Small Footprint
  • AC or Solar Powered

Meets MUTCD Standards

25 Month Warranty

Whether you are looking to enhance safety with solar powered pedestrian lights or need a comprehensive solution to your traffic concerns, ELTEC has the traffic control products you need.

Call us now at
800-227-1734
or
GET A QUOTE

Specs Request

Contact Form Submitted
*First name
*Last name
*Phone
*Email
GSA contract holder EDWOSB Certified WBE Recertification through 6/17/2022 WOSB Recertification 6/17/2022 HUB New through 06/17/2022 TexasHUB Certified
Privacy Policy Mission News Contact Us
800-227-1734 Newsletter Subscription
©2024 Electrotechnics Corporation

Sign up for our mailing list

Subscription Successful
*Email
First name
Last name
Phone
Zip Code
Company
Job Title