FS-3 DC Flasher product has been discontinued, and has been replaced with the new FS-4 DC Flasher. Please click the following link to see the new FS-4 DC Flasher product: https://elteccorp.com/products/traffic-signal-controllers/fs-4-dc-flasher/
ELTEC’s new FS-3 DC flasher, which is generally mounted on the cabinet back panel for traffic warning signals, is a replacement for both of our older models and combines all flash functions.
It uses solid-state circuitry and an integrated microprocessor for multiple programming options with minimal power consumption. It is primarily used in solar powered flashing beacon warning systems but can also be integrated into AC systems.
It also has a night run only feature, as well as automatic night dimming.
FS-3 DC Flasher product has been discontinued, and has been replaced with the new FS-4 DC Flasher. Please click the following link to see the new FS-4 DC Flasher product: https://elteccorp.com/products/traffic-signal-controllers/fs-4-dc-flasher/
ELTEC’s new FS-3 DC flasher (typically mounted on the cabinet back panel for traffic warning signals), replaces both the FS-2A and FS-2B models, combining all flash functions: wig-wag and every RRFB flash patterns.
The FS-3 is interchangeable (plug & play) since the dimensions and wiring are the same as the other models.
It uses solid state circuitry and an integrated microprocessor for multiple programming options with minimal power consumption. Primarily used in solar powered flashing beacon warning systems, it is used where there is a ready source of 11.4VDC-30VDC, but can also be integrated into AC systems with an added power supply.
In conjunction with a photocell, a night run only feature is available—dusk to dawn. Another user choice is the optional automatic night dimming triggered when the ambient light reaches the FAA (Federal Aviation Administration) definition of nighttime/daylight.
A 25 month warranty is standard on all ELTEC products. For more information download our DATA SHEET. For a price quote, click-on contact us today.
Dimensions
|
1.64”H x 5 ½ ”L x 2.625” W |
Input Voltage Range
|
11.4V DC to 30V DC |
Maximum Load Power
|
40 Watts per Output Circuit |
Temperatures Range
|
-34° C to + 74° C |
Flash Rate
|
75 *FPM for RRFB patterns; 55 FPM for Wig-Wag patterns |
Flash Circuits
|
1 or 2 circuits |
Night Dimming
|
Automatic via photocell (may be disabled) |
Night Run Only
|
Enabled/disabled via Internal Jumper (photocell required) |
Whether you are looking to enhance safety with solar powered pedestrian lights or need a comprehensive solution to your traffic concerns, ELTEC has the traffic control products you need.